Gardsman CTC-1131 Installation, Programming, Operating - page 20
18
or just press OK for no name.
Please see section Device Naming
for details.
E n t e r N a m e + O k
. . . . . . . . . .
StepB9. Press OK when finished and the
display will show The display will
show the new zone name and the
attribute next to the device:
I n s t a l l e d : ( O K ? )
I R H a l l w a y E
StepB10. Press OK, adding a PIR is now
completed, screen returns to the
Device +/- menu.
<
<
N
N
O
O
T
T
E
E
>
>
Press
, all the learning/setting
processes having done will be ignored,
the screen returns to Device +/- menu.
Remote Controller
StepC7. After a zone number for the RC is
assigned the following choice screen
is displayed.
P e r s o n a l A t t
M e d i c a l E m g
<
<
N
N
O
O
T
T
E
E
>
>
For a Remote Controller, you may
choose between Personal Attack and
Medical Emergency device mode.
P for Personal Attack Remote
Controller
Control Panel will give a Personal
Attack alarm when the panic button
is pressed for 3 seconds long or twice
within 3 seconds.
M for Medical Emergency Remote
Controller
Control Panel will give a Medical
Emergency alarm when the panic
button is pressed for 3 seconds long
or twice within 3 seconds.
StepC8. Press & keys to select your
option and press OK. You are now
invited to give a name or location
description to the device to help
understand system events. You can
enter up to 10 letters as you please
for the name followed by OK or just
press OK for no name. Please see
section Device Naming for details.
E n t e r N a m e + O k
. . . . . . . . . .
StepC9. Press OK when finished and the
display will show the new zone
name next to the device:
I n s t a l l e d : ( O K ? )
R C M R . S M I T H
StepC10. Press OK, adding a RC is now
complete, screen returns to the
Device +/- menu.
<
<
N
N
O
O
T
T
E
E
>
>
After a Remote Controller is added in,
you can use the Remote Controller to
arm/disarm the system. In addition,
pressing the Panic button for 3
seconds or twice within 3 seconds, the
Control Panel will generate a Panic
alarm.
The Panic alarm generated from the
Remote Controller will have to be
silenced at the Control Panel only.
See section Stop the Alarm.
Press
,
all
the
previous
learning/setting processes will be
ignored and the screen returns to
Device +/- menu.
Other Devices
For Smoke Detector, Remote Keypad, Water
Sensor and Night Switch, no further option
needs to be specified, hence after it is detected,
a zone is assigned, and the zone name
entered, the following screen is displayed.
I n s t a l l e d : ( O K ? )
S D L i v i n g r o o m
Press OK to confirm, adding a smoke detector,
or a Remote Keypad or a Water Sensor or a
Night Switch is now completed.