Garmin GNS 530AW Installation Manual - page 102
Page 5-24
500W Series Installation Manual
Rev. D
190-00357-02
5.3.23 GDL CONFIG Page
This page allows the user to set the attenuation and
model of the GDL 69. It is only available if one of the
RS-232 ports is configured for the GDL 69/69A.
The GDL 69A XM must be activated before use. If the
XM activation has not already been done, see the GDL
69/69A Installation Manual (190-00355-02) and the
GDL 69/69A XM Activation Instructions (190-00355-
04).
Selection Description
Attenuation
Sets the attenuation value for the GDL 69/69A. Refer to the GDL 69/69A
Installation manual (190-00355-02) to determine the correct attenuation value.
Model
Sets the model to either GDL 69 (weather only) or GDL 69A (weather and audio).
5.3.24 DATA LINK DIAGNOSTICS Page
The 8-character test word returned from the GDL 69 is
displayed on the DATA LINK DIAGNOSTICS page for
each of the following parameters:
Display Description
QOS
Quality of Service Test
TERR
Terrestrial Error Status
SAT1
Satellite 1 Error Status
SAT2
Satellite 2 Error Status
TUNER
Tuner Status
Figure 5-28. GDL CONFIG Page
Figure 5-29. Data Link Diagnostics