Garmin GNS 530AW Installation Manual - page 45
500W Series Installation Manual
Page 3-5
190-00357-02
Rev. D
3.7 Special Tools Required
Some of the connectors use crimp contacts. The table below identifies crimp tools required to ensure
consistent, reliable crimp contact connections for the rear D-sub connectors.
Table 3-3. Recommended Crimp Tools (or Equivalent)
Connector
Type
High Density
Standard Density
Wire
Gauge
22-24 AWG
18 AWG
20-24 AWG
Hand
Crimping
Tool
Positioner
Insertion/
Extraction
Tool
Positioner
Insertion/
Extraction
Tool
Positioner
Insertion/
Extraction
Tool
Military P/N
M22520/2-01
M22520/2-09 M81969/1-04
N/A
M81969/1-02 M22520/2-08 M81969/1-02
Positronic 9507
9502-3 M81969/1-04
9502-11
M81969/1-02 9502-5 M81969/1-02
ITT Cannon
995-0001-584
995-0001-739
N/A
N/A
N/A
995-0001-604
980-2000-426
AMP 601966-1 601966-6 91067-1
N/A
N/A
601966-5 91067-2
Daniels AFM8
K42 M81969/1-04
K774
M81969/1-02
K13-1
M81969/1-02
Astro 615717 615725
M81969/1-04
N/A
M81969/1-02
615724
M81969/1-02
NOTE
Insertion/extraction tools from ITT Cannon are all plastic; others are plastic with metal tip.