Intermec EasyCoder 4420 Install Manual

Page of 4

Download

Bookmark us

067548-001

3400, 4420, and 4440 Cutter Tray Instruction Sheet

You can use two different cutter trays to collect cut labels from your 3400, 4420,

and 4440 printers:

•

The basic cutter tray (Part No. 067324)

•

The deluxe cutter tray (Part No. 066369)

Both trays hook easily onto the cutter. On the deluxe cutter tray, you can adjust

the angle of the tray and the depth of the tray to match the amount of labels

you plan to cut.

To attach the basic cutter tray

1. Attach the cutter to your printer. For help, see the 3400, 4420, and 4440

Cutter User’s Manual (Part No. 066391).

2. Slide the tray arms under the mounting plate hinges and hook the tray arms

onto the hinges. The tray rests against the front of the printer.

Feed/Pause

Power/Data

Alert

Empty/Pause

Intermec

4420

Cutter

cover

44XXT.002

Basic

tray

Mounting

plate hinge

Page 1
067548-001 3400, 4420, and 4440 cutter tray instruction sheet you can use two different cutter trays to collect cut labels from your 3400, 4420, and 4440 printers: • the basic cutter tray (part no. 067324) • the deluxe cutter tray (part no. 066369) both trays hook easily onto the cutter. On the delu...
Page 2
3400, 4420, and 4440 cutter tray instruction sheet to attach the deluxe cutter tray note: depending on the angle of the tray, it may hang down below the bottom of the printer. If you want the tray to rest at a steep angle, move your printer so that the front is at the edge of the surface it is sitti...
Page 3
067548-001 attaching the deluxe cutter tray feed/pause power/data alert empty/pause intermec intermec 4420 cutter cover 44xxt.001 deluxe tray tray base thumbscrew base thumbscrew 6. Making sure that the top of the tray rests against the cutter cover, adjust the tray to the angle you choose. 7. Tight...