JabloCom EYE-02 User Manual - 4.3
JR_EYE‐02.ENG.MAN.MANUAL.10.DOCX
‐ 9 ‐
To protect the camera’s safety the CONFIG mode and all its sub‐modes will be closed automatically after a 5 minutes
timeout.
4.3
SMS
C
OMMANDS
Basic EYE‐02 camera functions can be operated by the text message (SMS) commands sent to the camera.
Commands are accepted only when sent from a mobile phone which is stored in the contact list.
If the EYE‐02 camera is protected by the
R e m o t e A c c e s s P a s s w o r d
R e m o t e A c c e s s P a s s w o r d
or the
C o n f i g u r a t i o n
C o n f i g u r a t i o n
P a s s w o r d
P a s s w o r d
, ,
set via the JabloTool software, then each SMS must be introduced with the appropriate
password.
Please note the
message command is case insensitive.
C
ONTROL COMMANDS
Control commands change the camera setting. If the EYE‐02 camera is protected by the
C o n f i g u r a t i o n
C o n f i g u r a t i o n
p a s s w o r d
p a s s w o r d
then each CONFIG command must be introduced with this password.
COMMAND
DESCRIPTION
WATCH
Switch EYE‐02 camera to the
W A T C H
W A T C H
mode.
Example
:
If the camera remote access is protected by the password MIKE then the
command must be send as:
MIKE WATCH
SLEEP
Switch EYE‐02 camera to the
S L E E P
S L E E P
mode.
STATUS
EYE‐02 camera will return a SMS indicating the current camera status.
Example
:
EYE02 status: Entrance delay, Time: 22/06/09 16:78:18
PICTURE
The EYE‐02 camera will return a multimedia message with the picture of
the current scene in front of the camera.
REPORT
The EYE‐02 camera sends a report of the latest events
be
SMS
or
MMS
. SMS is the default message type.
Example
:
EYE‐02 camera will send an MMS with the last event record from camera
history.
CREDIT
This command is especially for the prepaid SIM cards. The EYE‐02 camera
will return a text message with information about current credit on your
SIM card. This function is provided by your network operator and might not
work correctly with some networks.
HELP
Camera will return a text message with a list of the SMS commands syntax.
CONFIG
COMMANDS
CONFIG commands change the EYE‐02 camera settings. If the EYE‐02 camera is protected by the
C o n f i g u r a t i o n p a s s w o r d
C o n f i g u r a t i o n p a s s w o r d
then each CONFIG command must be introduced by this password.
COMMAND
DESCRIPTION
CONFIG PROFILE
Profile setting,
HOME
,
OUTDOOR
,
GARAGE
,
SHOP
or
CARE
Example:
CONFIG PROFILE SHOP
Camera will switch to profile SHOP
Example
:
Camera will switch to profile HOME
CONFIG CONTACT
Add a new contact.
Example:
CONFIG CONTACT MyEmail@domain.com
The e‐mail address
myemail@domain.com
will be added to the EYE‐02
camera contact list, the ALARM reports will be sent to this e‐mail address