JabloCom EYE-02 User Manual - Ther
JR_EYE‐02.ENG.MAN.MANUAL.10.DOCX
‐ 13 ‐
5.
O
THER
F
EATURES
5.1
C
ALL
C
ONTROL
The EYE‐02 camera provides a basic control function when it is called from a user’s phone. When a phone
saved in the contacts calls the EYE‐02 camera, the camera answers the call and plays the basic menu
navigation:
Welcome to Camera menu:
To listen to the sound from the camera microphone.......................press 1,
to receive an MMS with a current picture .......................................press 2,
to receive an MMS with the last alarm record ................................press 3,
to receive the latest events history in a text message .....................press 4,
to switch the camera to the WATCH mode......................................press 7,
to switch the camera into the SLEEP mode.......................................press 9.
The user may select the requested action by pushing the appropriate number key on the mobile phone.
5.2
N
IGHT
V
IEW
The EYE‐02 camera is equipped with a Night View function which allows take the infra‐red spectrum photos
(thermo‐vision).
The EYE‐02 camera has a built‐in infra LED lamp which can illuminate the scene by non‐visible infra light.
Thought the human eye can’t see such lights, the camera chip can collect a picture even in this spectrum.
The infra lamp illumination is activated automatically if picture taking is requested and the level of ambient
light is too low.
The night scene may be overexposed by IR lamp reflection from close located objects. In such case the internal IR lamp
can be disabled in camera configuration and an external IR lamp can be used instead.
5.3
M
ONITORING
The EYE‐02 camera can report all events from the system to the professional Alarm Receiving Centre ‐ ARC
(also known as Central Monitoring Station).
Refer the picture
E
on the back cover page of this manual for understanding of EYE‐02 communication with
commercial Security agency ARC.
The reports are done in accordance with international standard communication protocols for IP CID and
SMS CID (CID – Content Inspection Director). Protocol settings will be done by authorized ARC service
provider once you subscribe to their service.