JabloCom EYE-02 User Manual - 3.3
JR_EYE‐02.ENG.MAN.MANUAL.10.DOCX
‐ 5 ‐
3.3
P
ROFILES
The EYE‐02 camera allows fast and simple setting of all necessary detector parameters by selecting one of
the pre‐defined PROFILEs. These profiles are suitable for most camera applications. If necessary, the profile
may be further adjusted by the user.
HOME
HOME profile has been designed for camera installation inside
a building (house, flat, office). During WATCH mode, there are
no movements of people, no wind drafts, no significant
temperature changes, or loud noises etc. expected.
OUTDOOR
OUTDOOR profile fits best camera installation outside your
home.
The camera significantly reduces its detectors’ sensitivity in
OUTDOOR as there are many possible sources which could
cause a false alarm triggering (sunshine, animals, street noise,
wind, etc.).
Although the camera housing comes with a basic
water protection, we strictly recommend placing the
camera into a plastic cover to protect it against the
rain and wind once it is installed outdoor.
GARAGE
This profile is suitable for installation inside your garage. It is
similar to the HOME profile. Additionally, the GARAGE profile
provides a 30‐second entrance delay. It allows you to open the
garage or home entrance door first and switch the camera to
SLEEP during this delay.
CARE
Profile CARE has been especially designed for monitoring small
children and elderly or disabled people.
The camera used in CARE profile allows the
user to leave their home, stay in a short
distance away from the home and watch their
sleeping baby or ill grandmother etc. at the
same time.
The camera is activated by movement, by
sound (i.e. baby crying) or by a PANIC alarm
(triggered by a personal wrist button).
The internal acoustic camera signals are disabled in
the CARE profile. Also TILT detector is blocked to allow
the camera manipulation.
SHOP
The most powerful profile is SHOP. In this mode, all detectors
are active, including the permanent process of “Motion in
Picture” detection. This profile offers the highest quality of
permanent monitoring; consequently it is the highest energy
consumption profile.
This profile perfectly fits places requiring the whole day
monitoring and full protection during the night time, such as
shops, office corridors and reception areas, etc.