Jacobsen Eclipse 322 Repair Manual - page 263
CHASSIS
4222983 Second Edition
5-21
5
Disassembly and Assembly
See Figure 5-31.
Figure 5-31
Axle Shaft Bearings Removal
CAUTION
1.
Remove front wheels. (See “Front Wheels” on
page 7-14.)
2.
Remove front wheel hubs. (See “Front Wheel Hub”
on page 5-19.)
3.
Remove snap ring (1) from right-side axle shaft (18).
4.
Remove right-side axle shaft and bearing assembly
(18 and 2) using a suitable puller.
5.
Remove snap ring (3) from right-side axle shaft.
6.
Remove oil seal (4) using a suitable puller.
7.
Remove axle shaft bearing (2) from right-side axle
shaft using a suitable press.
8.
Repeat steps 3 through 7 for the left-side axle shaft
and bearing assembly (11 and 2).
1
Snap Ring
6
O-Ring
11
Left-Side Axle Shaft
15
Differential Case Assembly
2
Axle Shaft Bearing
7
Input Shaft Ball Bearing
12
Bearing Cap
16
Cover Screw
3
Snap Ring
8
Input Shaft
13
Bearing Cap Screw
17
Cover
4
Axle Shaft Seal
9
Input Shaft Ball Bearing
14
Differential Ball Bearing
18
Right-Side Axle Shaft
5
Snap Ring
10
Axle Housing
14
TN2783
15
1
2
9
14
3
4
3
4
2
1
11
13
12
12
13
16
17
18
7
8
6
5
10
Use care when removing components to avoid
damaging bearing surfaces, seal seating
surfaces, shaft splines, and gear teeth.