Jacobsen Eclipse 322 Repair Manual - page 275
CUTTING UNITS
4222983 Second Edition
6-9
6
Scalping
NOTE: Arrow indicates direction of travel.
Scalping is a condition in which areas of grass are cut
noticeably shorter than the surrounding areas, resulting in
a light green or even brown patch. This is usually caused
by an excessively low height-of-cut setting and/or uneven
turf.
Probable Cause
Remedy
HOC (height-of-cut) settings are lower than normal.
Check and adjust the HOC settings. (See “Height-of-Cut (HOC)
Adjustment” on page 6-17.)
Turf too uneven for the mower to follow.
Change mowing direction.
Incorrect bedknife for HOC.
Install correct bedknife for desired HOC. (See “Bedknife” on
page 6-27.)
Cutting too much grass at one time.
Mow more often.
Mowing (ground) speed is too fast.
Reduce mowing (ground) speed.
TN0222