Jacobsen Eclipse 322 Repair Manual - page 304
7-6
4222983 Second Edition
ACCESSORIES AND MISCELLANEOUS REPAIR
7
OPS
Removal and Installation
See Figures 7-6 and 7-7.
1.
Park the mower safely. (See “Park Mower Safely” on
page 1-6.)
2.
Remove OPS light (if equipped). (See “OPS Light” on
page 7-5.)
3.
Raise the hood.
Figure 7-6
4.
Remove two plugs (1) on each side of machine.
Figure 7-7
5.
Support the OPS (2) using a suitable lifting device.
6.
Remove three screws (3), lock washers (4), and flat
washers (5) on each side of machine.
7.
Remove OPS (2).
Installation Notes
• Install OPS by reversing the order of removal.
• Tighten OPS mounting screws (3) to 25 lb-ft (39
N·m).
Hood
Removal and Installation
See Figure 7-8.
1.
Park the mower safely. (See “Park Mower Safely” on
page 1-6.)
Figure 7-8
2.
Open and support hood (1) using a suitable lifting
device.
3.
Remove screws (2), washers (3), and nuts (4).
4.
Remove hood (1).
Installation Notes
• Support the hood with a suitable lifting device to aid
in installation.
• Install hood by reversing the order of removal.
TN2659
1
TN2397
5
4
3
2
1
TN2394
3
2
4