Karcher K 2.110 M Operator's Manual - Assembly Instructions
6
English
Screwdriver, small size (not supplied)
for connecting high pressure hose and
trigger gun.
Î
STEP 1:
Insert wheels into the side holes of
the unit.
Î
STEP 2:
Mount cover to backside.
Î
STEP 3:
Slide the transport handle into place.
Î
STEP 4:
1 Connect the detergent suction tube
to the pressure washer.
2 Place detergent tank into compart-
ment.
Î
STEP 5:
Fasten the 4 corners of the mesh
bag according the drawing.
Î
STEP 6:
Fasten the mesh bag on the remain-
ing holders.
Î
STEP 7:
Attach the high pressure hose to the
trigger gun.
A Pull out the locking slide from the
right side of the trigger gun handle.
B Insert the small end of the high pres-
sure hose into place.
C Push the locking slide back into the
trigger gun to lock the hose in position.
ASSEMBLY INSTRUCTIONS
Required tools
Assembly