LaCie 12big Rack Fibre 8 Quick Install Manual - 6.4.
LaCie 12big Rack Fibre and expansion
Completing the Installation
Quick Install Guide
page 11
In the address field, type in the following:
3.
http: //10.1.1.5:9292
login: admin
4.
password: password
Wait for a few seconds to be directed to the embedded
5.
Storeview module and to start managing your storage.
Access the embedded StorView GUI.
6.
You are now connected to the embedded Storeview
7.
GUI. From this page, you can set a fixed IP address,
which will allow you to monitor your storage from any
workstation located on your LAN by entering the fixed IP
address together with the 9292 port number.
Setting up the Embedded StorView Module:
Linux
Log in as “root.”
1.
Insert the Software & Manuals Disc into your CD disk.
2.
Change directories to the software location. Type:
3.
cd [CDROM mount point path]/software/storview/
embedded
Execute the Setup Tool. From the command prompt,
4.
type:
./esvsetupcl-linux
Embedded StorView Setup Tool. v1.0
Entering Menu Mode.
Follow the on screen prompts. At the conclusion of the
5.
setup you will be instructed on how to proceed. StorView
will start within your web browser.
Setting up the Embedded
6.4.
StorView Module: Mac OS
StorView is started by launching your web browser and enter-
ing the IP address of the local host or the embedded module
followed by “:9292.” For more information, refer to the
StorView Storage Management Software RAID Module User’s
Guide.
Also, for information regarding Secure Web Proxy, refer to the
StorView Storage Management Software RAID Module User’s
Guide.
For more detailed information about the individual module
LEDs or notifications, refer to the 12big rack fibre and expan-
sion Installation and User Guide.
Directly connect the Ethernet cable from the host com-
1.
puter’s Ethernet port to the Ethernet port of the lower
controller on the 12big fibre. You can use either a
straight or crossed RJ45 cable.
Open a Safari browser window.
2.