Lagoon 380 User Manual - page 11
NAVIGATION
9
NAVIGATION
1
LAGOON 380
Navigation under engine
Before starting the engine:
- Make sure that the fuel valves are open.
- Open the valves for the engine cooling systems.
(see chapter MOTORIZATION).
To start the engines, refer to the manufacturer's manual too.
z
STARTING THE ENGINE
- Turn on the battery switches located in the port and starboard aft
cabins.
- Disengage the reverse gear (to allow acceleration in neutral).
- Start the engine.
After starting the engine check for cooling water running out of the
exhaust and observe the colour of exhaust gases.
z
BATTERY COUPLING (OPTIONAL EXTRA)
In the case of low engine battery power use the battery coupling
function by turning on the coupling handle located in the starboard aft
cabin.
Once the engines have been restarted make sure that the coupling
handle is turned back to its original position.
z
NAVIGATION
When using the engine, avoid making noise and wake near other
users.
Respect speed limits.
WARNING
Never switch off the ignition or the electrical system
when the engine is running.