Lagoon 380 User Manual - page 79
MOTORIZATION
77
MOTORIZATION
8
LAGOON 380
z
FUEL
Do not wait until the fuel tanks are almost empty before re-fuelling
(the system may stop due to lack of fuel).
Ensure you have enough fuel before sailing.
z
MAINTENANCE
Refer to the manufacturer's manual provided with your boat.
Be careful to avoid any spillage of fuel or oil.
Check the colour of exhaust gases. In the case of excessive white or
black smoke, consult an engine specialist.
Engine instrument panel
The instrument panel contains all the checking functions of the
engine and it does not require any special precautions (refer to the
engine manual).
Propellers and anodes
The propellers supplied as a standard with you boat are the result of
tests carried out jointly with the engine manufacturer.
Remove the foldaway propellers (optional extra) at the end of each
season, dismantle them and clean them carefully.
Grease the thrust bearing surfaces and teeth.
Check that the propeller blades move easily.
If necessary, install new anodes (on hulls and base plates).
Replace anodes before they are 50% corroded.
RECOMMENDATION
Do not change the propellers without a specialist's
advice.
RECOMMENDATION
Ensure that the base plate anodes have good metal
contact with the transmissions.
Never paint the anodes.
Assemble the propellers before re-launching the
boat.