Lagoon 380 User Manual - page 23
NAVIGATION
21
NAVIGATION
1
LAGOON 380
Davits (optional extra)
z
INSTALLING A TENDER ONTO THE DAVITS
- Fix the davit line hooks to the forward and aft of the tender.
- Close the blockers located on the davits.
- Pull the bow of the tender up to halfway.
- Repeat the operation for the stern.
- Alternatively raise bow and stern until the tender comes into contact
with the davits.
z
LAUNCHING A TENDER FROM THE DAVITS
- Ensure that the blockers on the davits are closed.
- Thread the davit rope attached to the stern of the tender around a
winch (minimum of three turns).
- Open the blocker and let the line feed out to halfway.
- Close the blocker.
- Repeat the operation for the bow.
- Alternatively lower bow and stern until the tender comes into
contact with the water.
Environment
Do not discharge oil into the sea.
Take every precaution to prevent hydrofuel overflow when filling the
engine tank.
When in port, only use the onboard WC if it is equipped with organic
waste reservoirs.
The use of detergents is implicated in the destruction of marine plant
and animal life. Choose fully biodegradable cleaning products.
Do not throw plastic bags and bin bags into the sea. Use the bins
provided for this purpose at ports.
RECOMMENDATION
Like us you love the sea.
Help us to protect it; do not pollute!
WARNING
Nobody should be aboard the tender during
manœuvres carried out with the davits.
Moor up the tender during manoeuvres.
WARNING
The davits are designed to support a load of 200 kg
at maximum.
WARNING
When under sail remove the tender engine and store
it on board the boat.
Fasten the tender according to sea conditions.