Lagoon 380 User Manual - page 77
MOTORIZATION
75
MOTORIZATION
8
LAGOON 380
Engines
z
ENGINE ACCESS
Access to the engines is obtained through the skirt hatches.
z
ENGINE WATER INLET
The water inlet valves are essential for the operation of the engine.
These valves must be open before the engine is started (risk of rapid
deterioration of the exhaust pipe and of major damage to the engine).
- Keep the strainer under the hull as clean as possible.
- Brush the strainer when the boat is hauled.
- Do not cover the strainer with antifouling paint.
ADVICE: Get into the habit of checking immediately after starting the
engine that water is expelled with the exhaust gases.
If no water is expelled:
- Stop the engine immediately.
- Check that the valve is open.
Close the water inlet valve if the boat is left unattended for a
prolonged period.
Inspect and clean the water filter regularly.
RECOMMENDATION
Read carefully the instructions provided with your
boat.
RECOMMENDATION
Stop the engine before opening the hatches.
Should you need to access an engine while it is
running:
- Stay away from belts and mobile parts.
- Be careful to avoid catching clothing, long hair or
rings in the engine.
- Wear appropriate clothes (gloves, hat etc.).
WARNING
Never run the engine when the boat is out of the
water.