Lagoon 380 User Manual - page 39
Construction
The LAGOON 380 is built of balsawood sandwich (monolithic below
the water line), polyester resin and vinyl-ester; the counter-moulds
are monolithic and the partitions are made of laminated plywood.
The cockpit and deck are of balsawood sandwich.
Maintenance
The materials and equipment of your boat have been selected for
their high quality and performance and for their ease of maintenance.
However you must carry out a small amount of maintenance in order
to protect your boat from external elements (salt, sun, corrosion...).
Clean your boat preferably on shore with fresh water.
Use as few cleaning agents as possible.
Do not use solvents or aggressive detergents.
Do not discharge cleaning products into the sea.
Regularly brush the deck with a degreasing cleanser and fresh water.
DECK FITTINGS
- Thoroughly rinse all your equipment with fresh water.
- Periodically lubricate blocks, sheaves, turnbuckles, winches, tracks
and travellers with water-repellent grease.
- Stainless steel that is showing small spots or blisters of rust should
be cleaned and polished with a chrome and steel renovator.
EXTERNAL TEAK FITTINGS/TECK DECK
Regularly clean all exterior wood with fresh water using a sponge (if
necessary some gentle soap may be added).
PLEXIGLASS
- Rinse Plexiglass with fresh water.
- Polish with a soft cloth soaked in liquid paraffin.
- Use polishing paste to remove scratches.
Cleaning the bottom
Applying a tin-free anti-fouling paint every year will avoid the need for
tedious and frequent bottom cleaning. An epoxy undercoat is
recommended. You are reminded that any sanding before applying
anti-fouling paint attacks the gel coat and impairs its effectiveness.
Polishing will restore your boat's original shine. If a persistent and
isolated problem arises, contact your dealer.
HULL & DECK
37
HULL
& DECK
4
LAGOON 380
RECOMMENDATION
We strongly advise against the use of pressure
washers.
Do not use hot water or steam.