Lagoon 380 User Manual - page 59
Mast wire harness
During mast-stepping insert the cables through the base of the mast.
The connection is made at the mast step junction box located in the
forward locker of the saloon bench seat. See LAUNCHING chapter.
Electronics
Do not install electronic instruments or repeaters less than 1.5 m
away from the radio loudspeakers, if your boat has them.
Do not place the autopilot compass less than 0.5 m away from the
electrical harnesses.
z
ELECTRONICS PACKS (OPTIONAL EXTRAS)
Different electronics packs are offered on option.
ELECTRICITY
57
ELECTRICITY
6
LAGOON 380
RECOMMENDATION
For your electrical requirements, we recommend
you consult a specialist or one of our network of
technicians.
Shore supply
RECOMMENDATION
In order to reduce the risk of electric shock and fire:
- Before you plug in or unplug the boat/shore power
supply cable, switch off the shut off device
connected to the shore supply.
- Connect the boat/shore power supply cable in the
boat before connecting it to the shore supply
socket.
- Unplug the boat/shore supply cable on shore first.
Close the shore socket cover.
- Do not modify the connections of the boat/shore
supply cable.
DANGER
Never leave the extremity of a boat/shore power
supply cable hanging in the water - it could create
an electrical field liable to injure or kill any nearby
swimmers.