Lanier 5555 Operator's Manual - Changing Paper Size
Other manuals for 5555:
Material Safety Data Sheet
Manual is about: Digital Copier
of
252
Changing Paper Size
Service and Supplies
7 - 5
Changing Paper Size
Moving the Paper Guides
1
Pull out on the desired Paper Drawer until it stops.
2
Remove the thumbs screws in the Side Guides and End Guide.
Note: If you do not have thumb screws holding the Side Guide and End Guide in place, they must be installed
by a service technician.
3
Move the Guides to fit the new size paper.
4
Secure the Guides with the thumb screws.
5
Place the copy paper in the Paper Drawer.
If you need to change the paper size of any Paper Drawer, there are two easy procedures that you
need to perform:
• Move the paper guides in the drawer to fit the new paper size.
• Program the new paper size into the copier so the copier will recognize it.