Lanier 5555 Operator's Manual - Copier Terms
Copier Terms
Glossary
G - 5
Fuser Cleaning Pad
In certain copiers, it is necessary to clean toner residue and paper dust from the Fuser Rollers. This provides extended life of the
Rollers and cleaner copies. At certain intervals, this pad must be replaced.
A Display that shows icons related to service or supply related error condition. In some copiers, these icons may be incorporated
into a graphic representation of the copier to show the approximate position of an error.
Gray Scale
A term referring to the shades of gray between the black and the white areas on an original or copy. Normal copies reduce the
shades of gray to produce very dense blacks and clean whites. During the photo copy modes, the copier is set to reproduce the
shades of gray more faithfully, but usually at the expense of the black density.
Initial Settings
Those settings displayed by a copier when it comes to the READY condition. These settings may be either the Factory Default
settings, or Factory Default settings that have been modified permanently by either you or your Service Technician to better fit
your application.
The Key used to interrupt a long copy job in process in order to run a single copy. Interrupt copies are limited to one, and the
interrupt original must be copied from the Exposure Glass.
Key Operator
The main operator responsible for the copier. This individual performs all operator prescribed maintenance and is the main
contact in the event of a service call.
This term refers to the amount of toner placed on the copy through the imaging process. The amount of toner is controlled by the
“darkness” of the original and the amount of light used during the exposure process; more light means less toner or image.
Message Display
This display or part of a Touch Screen shows messages related to the status of the copier, Help messages and program
information.