Lanier 5555 Operator's Manual - page 39
Other manuals for 5555:
Material Safety Data Sheet
Manual is about: Digital Copier
of
252
Selecting Copy Darkness Modes
Basic Copier Functions
3 - 11
Selecting Copy Darkness Modes
Using Automatic Exposure Settings
1
Make sure that “AUTO” is displayed on the EXPOSURE key.
•
If “MANUAL” is displayed, touch the EXPOSURE key and
select AUTO.
2
Place your originals and press the START key.
•
The copier automatically detects the density of the originals and
makes copies at the optimum exposure.
You can set copy lightness or darkness using:
Select the Copy Darkness setting before making your copy. If you do not, the copier uses
Automatic Mode, as the default setting.
In Automatic Mode, your copier automatically detects the density of your original and
then selects the optimum exposure.