Lanier 5555 Operator's Manual - page 96
Other manuals for 5555:
Material Safety Data Sheet
Manual is about: Digital Copier
of
252
Trimming and Masking Copies
Copying Methods
4 - 44
2
Using the original scale and the front scale, read the values defining
the desired area as follows:
•
X1 is defined by the horizontal distance from 0 to the left edge of
the area you want to identify.
•
X2 is defined by the horizontal distance from 0 to the right edge
of the area you want to identify.
•
Y1 defined by the vertical distance from 0 to the bottom edge of
the area you want to identify.
•
Y2 is defined by the vertical distance from 0 to the top edge of the
area you want to identify.
•
Write the X1, X2, Y1, and Y2 values down for future reference.
Procedure
1
Touch the SPECIAL tab.
2
Touch the IMAGE EDITOR key.