Lanier 5555 Operator's Manual - Copier Terms
Copier Terms
Glossary
G - 3
placed on the drum for each image.
The Tray where an original document is placed to feed into an ADF for automatic feeding and copying.
These Guides are located in the Document Feed Tray. When correctly positioned against the sides of an original document, they
help to position the pages of the document.
A Tray used to accumulate the pages of an original document that have completed the copying process.
Document Scale
Two scales located to the front and left of the Exposure Glass intended to help locate original documents placed on the Glass for
manual copying and to identify a part of an original during the Editing process.
Documents
The set of pages either placed on the Exposure Glass or in the ADF to be copied.
Drum Assembly
The unit located inside the copier that receives the image during the exposure and imaging process and transfers this image to the
copy paper. It is light sensitive and should be protected from bright lights.
Copies that have been imaged on both sides of the sheet.
A Key used to place the copier into, or bring it out of an Energy Saver Mode. In the Energy Saver Mode, the amount of energy
consumed by the copier is reduced.
Energy Star
A voluntary program introduced by the United States Environmental Protection Agency (EPA) intended to encourage the use of
energy-efficient technologies in the workplace. Requirements to qualify for certification vary based on the speed of a Copier. For