Lanier R/C MARINER 40 MK II ARF Assembly Instructions Manual - Introduction
Assembly Instructions
Lanier R/C, INC. P.O. Box 458 Oakwood, Ga. 30566 PH 770 532 6401
© copyright 1989 Lanier R/C
2
2
or material shown to the company’s satisfaction to have been defective in workman-
ship or material at the time of purchase.
No other warranty of any kind, expressed or implied, is made with respect to the
merchandise sold by the company. The buyer acknowledges and understands that he
is purchasing only a component kit from which the buyer will himself construct a
finished flying model airplane. The company is neither the manufacturer of such a
flying model airplane, nor a seller of it. The buyer hereby assumes the risk and all
liability for personal or property damage or injury arising out of the buyers use of
the components or the finished flying model airplane, whenever any such damage
or injury shall occur.
Any action brought forth against the company, based on the breach of the contract
of sale to the buyer, or on any alleged warranty there under, must be brought
within 1year of the date of such sale, or there after be barred. This one year limita-
tion is imposed by agreement of the parties as permitted by the laws of the state
of Georgia.
Introduction
Thank you for purchasing the Lanier R/C Giant Scale
Stinger.
Stinger. We are sure you will be
happy with the quality of the kit and just as happy with the flying characteristics of the
Stinger.
Stinger. Because of the light weight and large wing area, the
Stinger
Stinger will accept a wide
range of engines. With a glow engine such as the O.S. BGX1, the
Stinger
Stinger is as docile as
a trainer. Install a 4.2 CID gas burner and it becomes an unlimited aerobatic machine.
This makes the
Stinger
Stinger a perfect “first time” giant scale airplane. If this is your first giant
scale please pay attention to the way we recommend setting up the controls. Bigger does
fly better but some of the hardware used on small plane will not be suitable for a giant
scale.