Lantech LGS-2300-RPS User Manual - page 33
Manual is about: Modularized Gigabit L2+ Managed Switch
of
92
25
3. Click
Apply
.
TFTP-Update Firmware interface
78B
6.4.5.2 TFTP Backup Configuration
User can save current EEPROM value from the switch to TFTP server, then go to the
TFTP restore configuration page to restore the EEPROM value.
1. TFTP Server IP Address: Fill in the TFTP server IP
2. Backup File Name: Fill in the file name
3. Click
Apply
.
TFTP-Configuration Backup interface
79B
6.4.5.3 TFTP Restore Configuration
User can restore EEPROM value from TFTP server, but user must put back the
backup file in TFTP server, switch will download it back.
1. TFTP Server IP Address: Fill in the TFTP server IP.
2. Restore File Name: Fill in the correct restore file name.
3. Click
Apply
.