Lantech LGS-2300-RPS User Manual - System Log Commands Set
74
ypes [all|tagged]
or
no switchport
acceptable-frame-t
ypes
mode
switch(config-if)#
switchport
acceptable-frame-types all
or
switch(config-if)#
no switchport
acceptable-frame-types
switchport
ingress-filtering
or
no switchport
ingress-filtering
Interface
configuration
mode
Set ingress filter
DISABLE switch(config)#
interface gigaethernet 1
switch(config-if)#
switchport ingress-filtering
or
switch(config-if)#
no switchport ingress-filtering
show vlan
[id|name]
[VLAN ID | Name]
Privileged
EXEC
Show VLAN of Group Name or
VLAN ID information
vlanid: 1 ~ 4094
switch#show vlan id
show interfaces
switchport
[gigaethernet|port-
channel] [port]
Privileged
EXEC
show Port PVID and ingress
filter & accept frame type
switch#
show interfaces switchport
gigaethernet 1
*Future Release
41B
System log Commands Set
Lantech
Commands
Command
Level
Description
Default
Example
show logging
[flash | ram |
sendmail | trap|
map]
Privileged
EXEC
Show system log information
switch#
show logging flash
logging-mode
{local|remote|smt
p}
or
no logging-mode
{local|remote|smt
p}
Global
configuration
mode
Enable logging mode for local,
remote and smtp
Switch(config)#
logging-mode local
Switch(config)#
no logging-mode local
Switch(config)#
logging-mode remote