Lantech LGS-2300-RPS User Manual - page 62
54
3. Accounting Port: Set the UDP destination port for accounting requests to the
specified Radius Server.
4. Shared Key: Set an encryption key for using during authentication sessions with
the specified radius server. This key must match the encryption key used on the
Radius Server.
5. NAS Identifier: A string used to identify this switch.
6. Click
Apply
.
Radius Client Configuration interface
72B
6.7.2 Port Security
Use the MAC address table to ensure the port security.
103B
6.7.2.1 Static MAC Address Table
User can add a static MAC address; it remains in the switch's address table,
regardless of whether the device is physically connected to the switch. This saves the
switch from having to re-learn a device's MAC address when the disconnected or
powered-off device is active on the network again. User can add / modify / delete a
static MAC address.
Packets with the specified destination address received in the specified VLAN are
forwarded to the specified interface.