Lantech LGS-2300-RPS User Manual - Vlan Commands Set
72
stp-admin-edge
[disable|enable]
Interface
configuration
mode
Use the stp-admedge interface
configuration command to
configure a port AdmEdge
variable.
Enable
switch (config)#interface
gigaethernet 1
switch(config-if)#
stp-admin-edge enable
or
switch(config-if)#
stp-admin-edge disable
stp-admin- stp
[disable|enable]
Interface
configuration
mode
Use the stp-admstp interface
configuration command to
configure a port controlled by
stp protocol.
Enable
switch (config)#interface
gigaethernet 1
switch(config-if)# stp-admin stp
enable
40B
VLAN Commands Set
Lantech
Commands
Command
Level
Description
Default
Example
vlan database
Privileged
EXEC
Enter VLAN configure mode
switch#vlan database
switch(vlan)#
vlanmode
[portbase| 802.1q|
gvrp ]
VLAN database
mode
To set switch VLAN mode.
8021Q switch(vlan)#vlanmode
portbase
or
switch(vlan)#vlanmode 802.1q
or
switch(vlan)#vlanmode gvrp
show vlan
or
show vlan
[GroupName|
VLAN ID]
VLAN database
mode
Show VLAN information
switch(vlan)#show vlan
or
switch(vlan)#show vlan 2
Port Base VLAN mode
no vlan group
[VLAN ID]
VLAN database
mode
Delete port base group ID
switch(vlan)#no vlan group 2