Lantech LGS-2300-RPS User Manual - System Commands Set
63
33B
System Commands Set
Lantech
Commands
Command
Level
Description
Defaults
Example
system name
[system name]
Global
configuration
mode
Set switch system name string
switch(config)#
system name xxx
system location
[system Location]
Global
configuration
mode
Set switch system location
string
switch(config)#
system location xxx
system
description
[description]
Global
configuration
mode
Set switch system description
string
switch(config)#
system description xxx
system contact
[contact]
Global
configuration
mode
Set switch system contact
window string
switch(config)#
system contact xxx
ip address
[ip-address]
[subnet-mask]
[gateway]
Global
configuration
mode
Use the ip address interface
configuration command to set
an IP address for a switch. Use
the no form
of this command to remove an
IP address or to disable IP
processing.
switch(config)#
ip address 192.168.1.1
255.255.255.0 192.168.1.254
write memory
Privileged
EXEC
Save user configuration into
permanent memory(flash rom)
switch#write memory
reload
Global
configuration
mode
Halt and perform a cold restart
switch(config)#
reload
default
Global
configuration
mode
Restore to default
no: restore all to default.
yes: reserved ip, username
and password.
switch(config)#default
admin username
[Username]
Global
configuration
mode
Changes a login username.
(maximum 32 words)
switch(config)#admin
username xxxxxx