Mahr Millimar C 1200 Operating Instructions Manual - page 33
33
Mahr GmbH • Millimar C1200
ABSOLUTE
mm
0.001
-0.01
0
0.01
3
ut tu
Measurement
Display
Setup
System
Absolute mode
Customer calibration
Factory calibration
Factory Settings
Info
ü
6
3
q
p
Measurement
Display
Setup
System
Absolute mode
Customer calibration
Factory calibration
Factory Settings
Info
t
q
ü
6.
Menu System
6.1
Select the Absolute mode
–
Press the ON / OFF key
=>
The
standard menu will appear on
the screen
–
Select menu
System with the u key
–
Select the submenu
Absolute mode
with the q key
– Press
4
to confirm
–
Set the probe mechanically to
"0"
–
Use the keys ut and t u to adjust
the scale
– Press
4
to confirm
–
To exit the input menu, press the ON /
OFF key.
In order to guarantee the maximum accuracy, the zero point of the probe should the set
from the mechanical to electrical zero before the first measurement is conducted. Use
the absolute mode setup to show the probe's raw value / the Absolute value.
!