NEC Univerge SV9100 User Manual - page 5
❑
Make
Announcement and replace handset
(Note: This feature only works if an external speaker is installed)
COMBINED PAGING
To page both internal & external zones:
❑
Lift
Handset
❑
Dial
*1
❑
Make
Announcement and replace handset
CONFERENCE CALLS
To set up a Conference Call:
While on an Outside call or connected to your first party
❑
Press
Conf Key on Display
❑
Dial
an outside line or second party
(When called party answers)
❑
Press
Add key on screen
(Repeat steps 2-4 to add more parties. Maximum of 16 internal or external
parties can be conferenced).
❑
Press
Begin to start conference
To exit a Conference without affecting the other parties:
❑
Hang up
CALL LOG
To view numbers of calls received / missed on your handset
❑
Press
List button on the Display
❑
Press
CID button on the Display
❑
Scroll
!
Down soft key to desired number
❑
Lift
Handset to call – Handset will dial automatically
SET INTERCOM TO EITHER
RINGING OR HANDSFREE
To select your intercom to be hands free:
❑
Press
Speaker
❑
Dial
721
❑
Press
Speaker to hang up
To select your intercom to be ringing:
❑
Press
Speaker
❑
Dial
723
❑
Press
Speaker to hang up
SELECTABLE RING TONES
To CHANGE your
Extension’s
incoming ring tones:
❑
Press
Speaker key
❑
Dial
720
❑
Dial
1 to set intercom ring, or 2 to set external call ring
❑
Dial
Code for the ring pattern you wish to hear:
1 = High
5 = Ring Tone 2
2 = Mid Range
6 = Ring Tone 3
3 = Low
7 = Ring Tone 4
4 = Ring Tone 1
8 = Ring Tone 5
❑
Press
Speaker to Hang Up
To Listen to the Incoming ring choices
!
5
!