NorthStar 951X Installation Manual - page 21
Other manuals for 951X:
Operator Instructions Manual, Addendum Operator's Manual, Operator's Manual, Installation Manual
Manual is about: GPS chart navigators
of
80
SECTION TWO - Installing the unit
951/952 INSTALLATION MANUAL Revision B
Page 11
Flush and
yoke-mounting
Whether you’re flush- or yoke-mounting the unit, allow at least 2½-inch
clearance at the rear for cables and connectors. For yoke mounting, leave
ample room (usually two inches) all around the sides and top to avoid
crowding the unit. For the recommended drilling dimensions, see
Figure 3 below. Before drilling holes, rotate the unit to the desired angle
to ensure proper clearance for cables and operation of the unit.
Figure 3: Yoke mount drilling dimensions