NorthStar 951X Installation Manual - page 61
Other manuals for 951X:
Operator Instructions Manual, Addendum Operator's Manual, Operator's Manual, Installation Manual
Manual is about: GPS chart navigators
of
80
SECTION THREE - Interfacing
951/952 INSTALLATION MANUAL Revision B
Page 51
Figure 22: Aux port interface diagram (wiring side view, solder
cup)
2. Slide the twist lock onto the connector body.
3. Screw the connector backshell to the connector body, and tighten.
4. Install the strain- relief clamp with two screws.
5. Connect both cable ends to a 941/951/952, as described below.
CONNECTOR A
(connects to unit aux port)
Pin number
1
2
3
4
CONNECTOR B
(connects to unit aux port)
Pin number
5
6
7
8
9
10
1
2
3
4
5
6
7
8
9
10
No connect
No connect
No connect
No connect
No connect
Aux input A
Ground/shield
Aux output A
Aux input B
Aux output B
Shield
Shield termina-
tion