Oce im2330 Operator's Manual - 102

102

3.SETTING OF BASIC COPY MODES

3

6. COPY DENSITY ADJUSTMENT

There are 2 types of image density adjustments: automatic mode and manual mode. 

In the automatic mode, the density of each original is detected automatically and the optimum image density 

is selected. In the manual mode, you can select the desired level of image density. Adjust the density with 

this mode depending on the original condition.

Automatic Copy Density Modes

1

Place paper in the drawer(s).

- "5.SETTING COPY PAPER"  Page 36

2

Place the original(s).

- "2.SETTING ORIGINALS"  Page 51

3

Press the [AUTO] button.

z

Select other copy modes as required.

4

Press the [START] button.

Manual Copy Density Mode

1

Place paper in the drawer(s).

- "5.SETTING COPY PAPER"  Page 36

2

Place the original(s).

- "2.SETTING ORIGINALS"  Page 51

3

Press either the   or   button to adjust 

the copy density to the desired level.

- Each time you press either the 

 or 

 button, your copies will 

become lighter or darker respectively.

z

Select other copy modes as required.

4

Press the [START] button.