Oce im2330 Operator's Manual - page 42
38
1.BEFORE USING EQUIPMENT
5.SETTING COPY PAPER (Cont.)
1
Recommended Paper/Handling and Storing Paper
The recommended paper
To make copies with a fine image, the following sheets are recommended.
If you use copy paper other than the recommended types, ask your service technician.
* An OHP film should surely be used in the Océ-recommended film. Using other film may cause a
malfunction.
Handling and Storing Paper
Pay attention to the following points:
- Avoid using paper that is specially treated or previously printed on another machine, and also avoid
performing double copying on the same side of paper; this may cause a malfunction
- Do not use paper with creases, wrinkles, curled paper, paper prone to curling, smooth paper, or tough
paper; this may cause paper misfeeds.
- Paper should be wrapped in its wrapping paper and stored in a damp-free place.
- To prevent paper from being folded or bent, store it evenly on a flat surface.
Paper Type
Océ Recommendation
Paper Weight
Plain Paper
TIDAL/Hammermill
20 lb. Bond
Thick 1
Laser/Hammermill
24 lb. Bond
Thick 2
Laser/Hammermill
32 lb. Bond
Exact Index/WAUSAU
90 lb. Index
Thick 3
Exact Index/WAUSAU
110 lb. Index
Tracing Paper
Tracing paper/Oustrich International
20 lb. Bond only
Sticker Labels
5165/AVERY
-
OHP Film
PP2500L/3M
-
Envelope
Westvaco Columbian CO138
Mailwell No. 553
-