Oce im2330 Operator's Manual - 218
218
9.JOB STATUS
12.ERROR CODE (Cont.)
9
RFC related
Error Code
Cause & Message
Corrective Action
2500
Syntax error, command unrecognized:
HOST NAME error, Destination mail
address error, Terminal mail address
error
Check if the Terminal mail address and
Destination mail address are correct. Check if
the mail server is operating properly. Turn the
power OFF and then back ON. Perform the job
in error again.
2501
Syntax error in parameters or arguments:
HOST NAME error, Destination mail
address error, Terminal mail address
error
Check if the mail server is operating properly.
Turn the power OFF and then back ON.
Perform the job in error again. If the error still
occurs, Contact your service representative.
2503
Destination mail address error
Check if the mail server is operating properly.
Turn the power OFF and then back ON.
Perform the job in error again. If the error still
occurs, Contact your service representative.
2504
HOST NAME error
Check if the mail server is operating properly.
Turn the power OFF and then back ON.
Perform the job in error again. If the error still
occurs, Contact your service representative.
2550
Destination mail address error
Check the state of the mail box in the mail
server.
2551
Destination mail address error
Check if the mail server is operating properly.
Turn the power OFF and the back ON.
Perform the job in error again. If the error still
occurs, Contact your service representative.
2552
Terminal/Destination mail address error
Turn the power OFF and the back ON.
Perform the job in error again. If the error still
occurs, Contact your service representative.
2553
Destination mail address error
Check if there is an illegal character in the mail
box in the mail server.