Oce im2330 Operator's Manual - 161
161
7
4
Key in the “USER NAME” and
“PASSWORD” on the User Authentication
menu, and then press the [ENTER] button.
- If "User Authentication for Scan to Email" has not been set, skip
to step 5.
- When pressing the [USER NAME] and [PASSWORD] button, the
letter entry menu is displayed. Key in the user name and
password, and then press the [ENTER] button.
- Ask your administrator for details of setting "User Authentication
for Scan to Email".
5
Press the [E-MAIL TO] button and select
the address.
- Press the [E-MAIL ADDRESS] button when you want to enter the
address directly with the soft keyboard.
See steps 5 and 6 in "Direct Entry" Page 171 for details.
- In the address book, select the address you want to send to.
- Select the address you want to send to after pressing the
[GROUP] button.
See steps 5 and 6 in "Group Entry" Page 173 for details.
- Select the address you want to send to after pressing the
[KNOWN ID] button.
See steps 5 to 7 in "Searching by ID Number" Page 175 for
details.
- Select the address you want to send to after pressing the
[SEARCH ADDRESS] button.
See steps 5 to 9 in "Searching by Address" Page 176 for
details.
- After pressing the [SEARCH ADDRESS] button, select the
address registered in the LDAP (Lightweight Directory Access
Protocol) sever without using the address book in this equipment.
To enable this function, it is required to register the LDAP server
name via network beforehand. You can also set the default LDAP
server that you want to select. (Ask your network administrator
for details)
See steps 3 to 5 in "Searching Address Using LDAP Server"
Page 178 for details.
- In the address book, you can select 2 or more addresses. Also,
you can combine the address book and group entry to select the
address you want to send to.
- See the [User Functions Guide] for entering and setting the
address.
- To return the SCAN TO E-MAIL menu from the address book,
press the [RETURN] button.