Oce im2330 Operator's Manual - 111

111

5

2. EDGE ERASE

If your original has a dirty or torn edge, it may be reproduced as a black stain on the copy. In that case, use 

Edge Erase Copying. A white border is created along the edges of the copy, eliminating those black stains.

* This function is available in only case of the standard-size original.

1

Place paper in the drawer(s).

- "5.SETTING COPY PAPER"  Page 36

- When using this mode in bypass copying ("Bypass Copying"  

Page 61), be sure to specify the paper size.

2

Place the original(s).

- "2.SETTING ORIGINALS"  Page 51

3

Press the [EDIT] button to enter the edit 

menu, and then press the [EDGE ERASE] 

button.

4

Adjust the width of the white border, and 

then press the [ENTER] button.

- The default width of the white border is 5 mm (0.197”).

- To adjust the width, press the [5 mm] or [20 mm] button to select 

the desired number, and then press the [ENTER] button.

z

Select other copy modes as required.

5

Press the [START] button.