Oce im2330 Operator's Manual - page 26
22
1.BEFORE USING EQUIPMENT
1.DESCRIPTION OF EACH COMPONENT (Cont.)
1
7 : Additional drawer module
Enables one drawer to be added to the paper feed pedestal.
The 2nd drawer is standard on the im2330/im2830.
8 : Slot cover
This cover is used when the 2nd drawer is not installed. (Not available for the im2830/im2330)
9 : Saddle-stitch finisher
Enables the saddle stitching in addition to the sort/group mode and stapling. (Hole punch unit can be
installed.) Requires the Bridge unit (IM23300010 sold separately) for the installation.
10: Single-staple finisher
Enables the sort/group mode and stapling. Requires the Bridge unit (IM23300010 sold separately) for the
installation.
11: Hole punch unit
Makes punching holes on output pages.
12:Automatic duplexer
Enables duplex copying.
Standard on the im2330/im2830.
13: Network interface card
Enables network functions.
Standard on the im2330/im2830.
We have other options: Work tray, Fax board, Printer kit
*
, Printer/Scanner kit
*
, Scanner upgrade kit
*
, Fax
board 2nd line, Wireless LAN adapter, Scrambler board, Parallel interface kit, Data overwrite kit.
Contact your service technician or representative for the details.
* im2330/im2830
Printer kit: IM23300050
Printer / Scanner kit: IM23300050
Scanner upgrade kit: CM4530320