Oce im2330 Operator's Manual - page 98
94
3.SETTING OF BASIC COPY MODES
3.SELECTING FINISHING MODES (Cont.)
3
Hole Punch Mode (Optional)
When the optional hole punch unit is attached to the finisher (Optional), you can hole punch your copies.
* The paper weight should be in the range of 17 lb. to 53 lb. Special paper such as OHP files or labels is
excluded.
1
Place paper in the drawer(s).
- "5.SETTING COPY PAPER" Page 36
- When using this mode in bypass copying ("Bypass Copying"
Page 61), be sure to specify the paper size.
2
Place the original(s).
- "2.SETTING ORIGINALS" Page 51
3
Press the Finisher button on the basic
menu as shown in the illustration on the
right (highlighted).
4
Press the [HOLE PUNCH] button.
z
Select other copy modes as required.
5
Press the [START] button.
Available paper sizes for the hole punch:
Since the number of punch holes and the distance between the
holes vary depending on the country, purchase a hole punch unit
that meets your requirements. (For details, consult your service
technician.)
* The paper mentioned above is Océ-recommended paper.
Specifications and appearance are subject to change without
notice in the interest of product improvement
Number of punch holes and hole
diameter
Available paper size
North America
(IM2300020N)
2/3 holes switchable
(0.315” dia.)
2 holes: LG, LT-R, COMP, A4-R
3 holes: LD, LT, A3, A4