Oce im2330 Operator's Manual - 160

160

7.SCANNING THE IMAGES

7

4. SCAN TO E-MAIL

In this function, the scanned data can be sent to the specified E-mail address as an attached file.

After finishing the setting for the E-mail transmission, the settings for SCAN TO E-FILING or SCAN TO FILE 

can be made and the data can be scanned simultaneously.

* To use SCAN TO E-MAIL, the configuration of the equipment needs to be set by the network 

administrator.

* For receiving an E-mail, see "3.RECEIVING INTERNET FAX"  Page 185.

To use SCAN TO E-MAIL function, ‘optional Printer kit and optional Scanner upgrade kit’, or ‘optional 

Printer/Scanner kit’ is required.

1

Place the original(s).

- "2.SETTING ORIGINALS"  Page 51

- If there is not enough space in the hard disk, the number of 

originals that can be scanned may be restricted. According to the 

network environment, available data amount may be restricted.

The reversing automatic document feeder (optional) enables 

consecutive scanning of more than one original.

2

Press the [SCAN] button on the control 

panel to enter the scan menu.

3

Press the [SCAN TO E-MAIL] button.