Oce im2330 Operator's Manual - 208
208
9.JOB STATUS
9
12. ERROR CODE
If an error occurs while using the optional Fax, optional Internet Fax, or optional scan, the error code is
displayed in the status of each log. Take an appropriate action with reference to the following.
Fax/Internet Fax
Error Code
Cause & Message
Corrective Action
Fax
0011
Paper jam
Clear the jammed printing paper.
0012
Original jam
Clear the jammed original.
0013
Door open
Firmly close the open door.
0020
Power interruption
Check the power interruption report.
0030
Reset
(Transmission is cancelled.)
0033
Polling Error
Check polling options setup (Security Code,
etc.), and check if the polling document
exists.
0042
Memory full
Make sure that there is sufficient memory
before making the call again.
0050
Line busy
Retry communications.
0053
Security Mismatch in Relay or Mail Box
transmission
Confirm the remote party’s Security Code,
system password, and your setup.
00B0-00B5
00C0-00C4
00D0-00D2
Signal Error or Line Condition Error
Retry communications. Frequent failures may
indicate a phone line problem. If possible,
move the unit to another line and try your
communications again.
00E8
HDD error
Retry communications. If the error still occurs,
contact your service representative.
00F0
Software failure
Retry communications. If the error still occurs,
contact your service representative.
00F1
Hardware noise
Retry communications. If the error still occurs,
contact your service representative.
Internet Fax
1C10
System access abnormality
Turn the power OFF and then back ON.
Perform the job in error again. If the error still
occurs, contact your service representative.
1C11
Insufficient memory
When there are running jobs, perform the job
in error again after the completion of the
running jobs. If the error still occurs, turn the
power OFF and then back ON, and perform
the job again.
1C12
Message reception error
Turn the power OFF and then back ON.
Perform the job in error again.