Oce im2330 Operator's Manual - 146

146

6.STORING ORIGINALS

2.COPY & FILE (Cont.)

6

4

Press the [FILE NAME] button to enter the 

file name of the stored data.

- The letter entry menu is displayed.

A file name can contain up to 45 letters.

5

Select the desired location.

- [MFP LOCAL]: Select when the originals should be stored in the 

hard disk in the main equipment. The original data will be stored 

under the directory path shown on the screen.

- [REMOTE 1], [REMOTE 2]: Select when the originals should be 

stored in the hard disk of user's PC.

The administrator has to make settings to select “REMOTE 1” or 

“REMOTE 2”.

For details, see the [Network Administrator's Guide].

6

Select the desired file format.

- The SCAN folder is automatically created and the original data 

will be stored into this folder. If you select “TIFF (SINGLE)”, an 

additional folder with the name you entered in step 4 is further 

created, and each page will be stored into this folder. You can 

access the original data with the client PC via network, by opening 

the FILE_SHARE folder in the equipment’s hard disk.

7

After all the settings have been made, 

press the [ENTER] button.

8

Press the [START] button.