Oce im2330 Printing Manual - page 159

Installing the Printer on Mac OS 8.6/9.x    157

10

Click the [Printing] menu and select [Change Setup...].

y

The LaserWriter setup dialog box appears.

11

Select each option item in the “Change” drop down menu and 

select installed option in the “To” drop down menu according to the 

configuration of this equipment.

y

Finisher

Not Installed — Select this if a finisher is not installed.

Single-Position Stapler — Select this when the Hanging Finisher is installed.

Multi-Position Stapler — Select this when the Finisher or Saddle Stitch Finisher is 

installed.

Multi-Position Stapler and Hole Punch — Select this when the Finisher or Saddle 

Stitch Finisher and Hole Punch unit are installed.

Job Separator — Select this when the Job Separator is installed.

Offset Stacker — Select this when the Offset Stacker is installed.

When you select “Multi-Position Stapler” or “Multi-Position Stapler and Hole Punch”, the 

saddle-stitching function will be selectable for printing.  However, saddle-stitching is 

available only when the Saddle Stitch Finisher is installed.