Oce im2330 Printing Manual - page 170
4 Installing Client Software for UNIX
168 Setting Up the UNIX Filters
Creating a print queue manually on HP-UX
1
Log on to the root account.
2
Open your Linux/UNIX editor.
3
Create the following file.
/etc/lp/interfaces/
4
Add a line as below in the
dest=
5
Save the file.
6
Enter the following command:
chmod +x
7
Enter the following command:
chown lp:lp
8
Enter the following command:
ps -ef | grep lpsched | grep -iv grep > /dev/null 2>&1
9
Enter the following command:
Echo $?
10
If “0” is outputted on the screen, turn the scheduler OFF. Enter the
following command:
/usr/sbin/lpshut > /dev/null 2>&1
11
Enter the following command:
/usr/sbin/lpadmin -p
-m net_estbw -o rm
12
Enter the following command:
accept
13
Enter the following command:
enable
14
If you turn OFF the scheduler in step 10, turn the scheduler ON.
Enter the following command:
/usr/lpsched > /dev/null 2>&1
Creating a print queue manually on IBX AIX
1
Enter the following command:
ls /opt/oce/tap/filter
2
If the above directory does not exist, enter the following command:
mkdir /opt/oce/tap/filter
3
Log on to the root account.
4
Open your Linux/UNIX editor.