Oce im2330 Printing Manual - page 369
Document Monitor Errors 367
Printer Error
Finisher Disconnected - Please Join Finisher to
Copier.
Join the Finisher to the copier stably.
Hole Punch Jam in Finisher - Please Clear Hole
Punch
Clear hole punches from the Finisher. Refer to the
Operator’s Manual for Basic Function for
instruction.
Staple Jam in Finisher - Please Clear Staple
Remove jammed staples from the Finisher. Refer
to the Operator’s Manual for Basic Function for
instruction.
Staple Jam in Lower Tray of Finisher - Please
Clear Staple
Remove jammed staples from the Saddle Stitch
Finisher. Refer to the Operator’s Manual for
Basic Function for instruction.
Toner Not Recognized - Please Check Toner
Check and adjust the toner bottle.
Finisher Lower Tray Full - Please Remove Paper
Remove paper from the Lower Tray of Saddle
Stitch Finisher.
Mixed Sized Paper not Allowed - Please Check
Paper
Check the paper.
Finisher Tray 1 Paper Full - Please Remove Paper. Remove paper from the Finisher Tray 1.
Finisher Tray 2 Paper Full - Please Remove Paper. Remove paper from the Finisher Tray 2.
Inner Tray Paper Full - Please Remove Paper.
Remove paper from the Inner Tray.
This error message is only displayed for
im4530 Series, im2830 Series,
cm4530 Series.
Hole Punch Full in Finisher- Please Clear Hole
Punch.
Dispose the punched paper bits. Refer to the
Operator’s Manual for Basic Function for
instruction.
Job Separator Upper Paper Full - Please Remove
Paper.
Remove paper form the Job Separator Upper Tray.
This error message is only displayed for
im4530 Series, im2830 Series,
.
Job Separator Lower Paper Full - Please Remove
Paper.
Remove paper from the Job Separator Lower Tray.
This error message is only displayed for
im4530 Series, im2830 Series,
.
Offset Tray Full - Please Remove Paper.
Remove paper from the Offset Tray.
This error message is only displayed for
im4530 Series, im2830 Series,
.
Printer Output Error - Please Contact Service
Technician.
Contact your service representative.
Printer Input Error - Please Contact Service Tech-
nician.
Contact your service representative.
Time for Slit Glass and Main Charger Cleaning -
Please Clean Slit Glass and Main Charger
Contact your service representative.
This error message is only displayed for
earlier models.
Status
Details
Description