Oki C9200dxn Duplex Unit Installing

Phase 1: Install the Duplex Unit

!

If you will be using the duplex unit to print complicated

files with graphics, you need to purchase and install 64

MB additional printer memory (OKI # 70037401).

1 Unpack the duplex unit and remove any shipping

materials.

2 Turn the printer off, then pull out Tray 1.

3 Push up on the latches at either end of the front cover and

remove it from the printer.

!

Do not throw the front cover away: you will need it if

you ever remove the duplex unit from the printer.

4 Place the duplex unit on top of Tray 1 and align it so that

it is flush with the tray.

5 Open the small cover on the duplex unit and pull the blue

handle gently until the duplex unit and Tray 1 are locked

together.

6 Gently slide the tray/duplex unit back into the printer.

7 Turn the printer back on.

(continued on back)

Installing

the Duplex Unit

OKI

®

 P/N 

70037101