Oki C9200dxn Paper Tray Install Manual
7 Lower the printer onto the auxiliary tray(s), aligning the
printer with the tray(s) and lowering the holes/connector
in the bottom of the printer onto the pins/connector on the
tray. (It helps to have an extra person to watch and guide
you in placing the printer on the pins.)
8 Reattach the interface cable.
9 Plug the power cord in and turn the printer on.
10 Go into the printer menu and check to be sure that the
printer is recognizing the newly installed trays:
a Press MENU repeatedly until
MEDIA MENU
appears
on the display.
b Press ITEM + repeatedly until you see
TRAY2
MEDIATYPE
on the display.
c If you installed two trays, press ITEM + until you see
TRAY3 MEDIATYPE
on the display.
d If you do not see
TRAY2 MEDIATYPE
or
TRAY3
MEDIATYPE
, the printer is not properly attached to
the connector on the tray(s) and you need to lift the
printer and reposition it.
Phase 2: Load Print Media
1 Pull the tray out.
a If necessary, lift out the media
indicator at the right end of the tray
and reposition it to correspond
with the media you will normally
use in that tray.
b Position the paper guides in the tray.
c For legal size and larger media, position the brackets:
(continued on back)
Caution!
• The printer weighs 160 lbs. (72 kg): use at
least 2 people to lift the printer.
• Grasp the printer using the hand holds on
the sides
and on the back.
• Use proper lifting techniques.
Phase 1: Install the Auxiliary Tray(s)
!
You can install up to two auxiliary paper trays on the
printer, or one Auxiliary Tray and one High Capacity
Feeder.
Before you start, find an extra person to help guide
you in placing the printer on the pins.
1 Unpack the tray(s) and remove the shipping materials.
2 Turn the printer off and unplug the power cord.
3 Remove the interface cable.
4
Move the tray into position (paper tray facing front),
noting the location of the pins (
1) and connector (2).
5 If you are installing two trays, place the first tray on top
of the second one, aligning the holes/connector in the
bottom of the upper tray with pins/connector on the lower
tray.
6 Grasp and lift the printer by the hand holds on the sides
and back.
Installing
the Auxiliary Paper Tray(s)
OKI P/N
41529701