Oki C9200dxn Transfer Belt Replacing
Other manuals for C9200dxn:
Configuration Manual, Installation Instructions Manual, Installation Instructions Manual, User Manual, Installation And Setup, Limited Warranty, User Manual, User Manual, Handy Reference, Setup Manual, Paper Tray Install Manual, Duplex Unit Installing, Brochure & Specs
Manual is about: Oki Printer User Manual
of
2
4 Press the blue transfer belt lock levers (circled) to the left
(toward the open cover).
5 Lift the left end of the transfer belt unit up by the blue
handle.
5 Grasp both handles and lift the transfer belt unit out of the
printer.
6 Unpack the new transfer belt unit. (Be careful to avoid
touching the shiny black surface of the transfer belt.).
(continued on back)
Caution! The fuser unit (at the left in the printer) may be
HOT. Let it cool down before attempting to replace the
transfer belt.
1 Turn the printer off.
2 Pull up on the handle and open the top cover.
3 Remove the four image drums/toner cartridges, then
cover them to protect them from light while you are
replacing the transfer belt.
OKI P/N
41531501
Replacing
the Transfer Belt
Front
Back
Left
Right