PS Audio Power Plant P300 Instructions Manual
Instructions for Model P300
The Fan Module upgrade to your unit is a
fairly simple process. If you have any
questions at any time, please contact us
by email, fax or telephone at the numbers
listed at the end of these instructions.
Before beginning the upgrade, you will
need to do the following: Unplug the P300
from the wall. Really unplug it. Take out
the power cord and take out the cords to
your a/v equipment.
Assemble the following tools and work
area:
A clean table to place the P300
while you are working.
A small Phillips head screwdriver
A desk lamp, gooseneck lamp or other
light placed next to the P300 so you
can see what you are doing.
A small cup to hold the screws you are
going to remove from the P300.
The new P300 Fan Module Kit.
INSTALLING THE UPGRADE
You should have the following items: